INFINISIL™ Spec-Grade Performance Silicone
Jump to Navigation
INFINISIL™ Spec-Grade Performance Silicone is designed to be used in applications where higher physical properties and lower compression set are required. It is resistant to extreme high and low temperature ranges and is proven to be an excellent gasketing material. Meets the A-A-59588 specification which supercedes ZZ-R-765.
- Temperature Range: -80°F to +450°F
- Roll Width: 36", 48"
Molded Sheet Size: 36"x36", 48"x48" - Trim: Untrimmed
- Finish: Smooth
(Nylon Fabric Finish also available) - Color: Red
- Stock Item Minimum: One Foot
Non-Stock Item Minimum: Please contact us for minimums & availability
| Durometer Hardness (Shore A ± 5) |
Compound | Thickness (inches) |
Width (inches) |
Tensile (psi) | Ultimate Elongation (%) |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications | ||
|---|---|---|---|---|---|---|---|---|---|
| Minimum | Typical | Minimum | Typical | ||||||
| 40 | 040S0561 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
36, 48 | 725 | 800 | 300 | 400 | 2.36 lb | A-A-59588 2A & 2B Grade 40, AMS 3301, ASTM D2000 M1GE 405 |
| 50 | 050S0562 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
36, 48 | 725 | 820 | 250 | 300 | 2.42 lb | A-A-59588 2A & 2B Grade 50, AMS 3302, ASTM D2000 M1GE 505 |
| 60 | 060S0563 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
36, 48 | 725 | 820 | 200 | 320 | 2.57 lb | A-A-59588 2A & 2B Grade 60, AMS 3303, ASTM D2000 M1GE 605 |
| 70 | 070S0564 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
36, 48 | 725 | 900 | 150 | 280 | 2.59 lb | A-A-59588 2A & 2B Grade 70, AMS 3304, ASTM D2000 M1GE 705 |
Buy the Foot on select INFINISIL™ Spec-Grade Performance Silicone parts
Select and click an item below to purchase:
Other Silicone Sheet Rubber Products
INFINISL™ FDA Performance Silicone
| Polymer: | Silicone |
|---|---|
| Duro: | 40–80 |
| Thick: | 1/32–1/4 |
| Compliance: |
|
INFINISIL™ Fiberglass Inserted Silicone
| Polymer: | Silicone |
|---|---|
| Duro: | 40–70 |
| Thick: | 1/16–1/4 |
| Temp: | -80°F to +450°F |
Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.
View complete Terms & conditions of Sale for suitability of use and formulations >
View Cart (