INFINISIL™ Performance Silicone
Jump to Navigation
WARCO BILTRITE’s INFINISIL™ Performance grade silicone sheet is designed to be used in applications where extreme high and low temperature resistance is needed. This material also provides excellent UV and ozone resistance, is non-toxic, chemically inert and fungus resistant.
Also available with fiberglass reinforcement. View INFINISIL™ Fiberglass Inserted Silicone Sheet >
- Temperature Range: -80°F to +450°F
- Roll Width: 36", 48"
Molded Sheet Size: 36"x36", 48"x48" - Trim: Untrimmed
- Finish: Smooth
(Nylon Fabric Finish also available) - Color: Red
(Other colors are available) - Stock Item Minimum: One Foot
Non-Stock Item Minimum: Please contact us for minimums & availability
| Durometer Hardness (Shore A ± 5) |
Compound | Thickness (inches) |
Tensile (psi) | Ultimate Elongation (%) |
Estimated Weight Per Linear Foot (1/8" x 36") |
Features |
|---|---|---|---|---|---|---|
| Typical | Typical | |||||
| 40 | 040S0842 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
750 | 450 | 2.36 lb | High & Low Temperature Resistance, |
| 50 | 050S0843 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
750 | 400 | 2.46 lb | High & Low Temperature Resistance, |
| 60 | 060S0844 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
800 | 350 | 2.63 lb | High & Low Temperature Resistance, |
| 70 | 070S0845 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
800 | 300 | 2.59 lb | High & Low Temperature Resistance, |
| 80 | 080S0846 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
800 | 200 | --- lb | High & Low Temperature Resistance, |
Other durometers, colors, thicknesses, & widths are available, please contact us for quote
Buy the Foot on select INFINISIL™ Performance Silicone parts
Select and click an item below to purchase:
Other Silicone Sheet Rubber Products
INFINISIL™ Spec-Grade Performance Silicone
| Polymer: | Silicone |
|---|---|
| Duro: | 40–70 |
| Thick: | 1/32–1/4 |
| Spec: |
|
INFINISL™ FDA Performance Silicone
| Polymer: | Silicone |
|---|---|
| Duro: | 40–80 |
| Thick: | 1/32–1/4 |
| Compliance: |
|
INFINISIL™ Fiberglass Inserted Silicone
| Polymer: | Silicone |
|---|---|
| Duro: | 40–70 |
| Thick: | 1/16–1/4 |
| Temp: | -80°F to +450°F |
Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.
View complete Terms & conditions of Sale for suitability of use and formulations >
View Cart (