Fluorozone® FDA Performance FKM
Jump to NavigationFormulated for food and lab applications where FDA compliance is required. Made from FDA-approved ingredients per21CFR 177.2600 including 100% virgin domestic-made premium Fluoroelastomer FKM polymer. With 66% Fluorine content, this material exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers.
Fluorozone Sheet, Extrusions and Molded products are available.
Conact us to learn more.
- 66% Fluorine
- Made in USA
- No Regrind and No Recycled Materials
- RoHS, REACH, & CA Prop 65 Compliant
- FREE SHIPPING on Full Roll Orders
(continental USA only - contact us for details)
- Temperature Range: -20°F to +450°F
- Roll Width: 36", 48"
Molded Sheet Size: 36"x36", 48"x48" - Trim: Untrimmed
- Finish: Smooth
(Nylon Fabric Finish also available) - Color: Black
- Minimum Purchase: 2 Rolls
Contact us for a quote on single roll increments
Durometer Hardness (Shore A ± 5) |
Compound | Thickness (inches) |
Tensile (psi) | Ultimate Elongation (%) |
Estimated Weight Per Linear Foot (1/8" x 36") |
Compliance | ||
---|---|---|---|---|---|---|---|---|
Minimum | Typical | Minimum | Typical | |||||
60 | 060F0221 | Rolls: 1/64 - 1/4 Molded Sheets: Up to 4 |
800 | 1200 | 200 | 250 | 3.76 lb | FDA 21 CFR 177.2600 |
75 | 075F0223 | Rolls: 1/64 - 1/4 Molded Sheets: Up to 4 |
800 | 1300 | 150 | 200 | 3.92 lb | FDA 21 CFR 177.2600 |